The short answer
Angi’s 2026 cost guide, based on a survey of its customers, puts a typical house renovation at roughly $19,500 to $88,000, with an average near $52,000 for a home of 1,250 to 1,600 square feet. It reports $15 to $60 per square foot for most projects and more than $150 per square foot with premium finishes. The full spread it reports runs from about $3,000 to $190,000.
A range that wide tells you one thing clearly: the word “renovation” covers very different projects. The useful question is where yours sits, and that depends on a handful of decisions.
What decides the price
Scope: surfaces or systems
Replacing what you can see — flooring, paint, fixtures, cabinet fronts — is the least expensive kind of work. Costs climb when the project reaches what is behind the walls: plumbing, wiring, ductwork, framing. Moving a kitchen sink or taking out a wall brings in more trades, permits, and inspections.
Which rooms
Kitchens and bathrooms cost the most per square foot because they concentrate plumbing, electrical work, cabinetry, and tile. Angi’s per-room ranges show the gap: $14,500 to $40,500 for a kitchen and $6,500 to $28,000 for a bathroom, against $1,500 to $5,500 for a bedroom.
Finish level
Stock cabinets and laminate counters can cost a fraction of custom cabinetry and stone. The same is true of tile, flooring, fixtures, and windows. Finish choices are where most budgets grow, one upgrade at a time.
The house itself
Older homes hide surprises: outdated wiring, galvanized pipes, water damage, materials that need special handling. None of it is visible when a contractor writes the estimate, and all of it costs money when found.
Where you live
Labor rates differ widely between regions and between cities and rural areas. National figures are a starting point. Local quotes are the real number.
What the averages leave out
- Permits. Angi reports about $500 to $2,500 for major renovations. Requirements are local.
- Design. Larger projects may need an architect, designer, or engineer.
- Living costs. Eating out during a kitchen remodel, storage, or temporary housing.
- Contingency. Money set aside for what is discovered mid-project. Ten percent is a common starting point, more for older homes.
How to size your own project
- Write the scope in one paragraph. Which rooms, and for each one: cosmetic, replace-in-place, or reconfigure.
- Get a planning range. The Home Renovation Cost Estimator builds one by room or by square footage from published data.
- Price the expensive rooms on their own. Use the kitchen and bathroom estimators.
- Turn the range into a budget. The Home Renovation Budget Planner adds a contingency and compares the total with your funds.
- Get at least three written quotes for the same scope, and compare them line by line.
Estimates are not quotes
Every figure here is a national planning number. A contractor who has walked through your home, seen its condition, and priced your chosen materials is the only source for what your project will cost. Use the estimates to decide whether a project is feasible and to recognize a quote that is far outside the norm.
Source for cost figures: Angi, “How Much Does It Cost to Renovate a House? [2026 Data],” updated March 17, 2026.
Reviewed October 2026. Figures are national planning numbers, not quotes. Methodology
