How this estimate is built
The estimator shows the range our source publishes for the item you select: either its overall range for an HVAC replacement or its range for one type of equipment. That range is shown as reported.
The source does not publish prices for a specific combination of equipment type and home size, so this estimator does not adjust for home size. Ductwork is the one calculated line: the source’s per-linear-foot figure multiplied by the length you enter. Permits are added from the source’s published range when you select them.
The source does not say whether its by-equipment figures include installation labor. Ask each contractor for a price that states equipment and labor separately.
What moves the price
- Capacity — larger homes and hotter or colder climates need larger equipment. A contractor should size it with a load calculation, not by matching the old unit.
- Efficiency — higher-efficiency equipment costs more up front and less to run.
- Ductwork — leaky or undersized ducts may need sealing, modification, or replacement.
- Fuel and electrical changes — switching from gas to a heat pump can require electrical panel work.
- Access — attic and crawlspace installations take longer.
- Local labor rates and permits — both vary widely by area.
Incentives
Utility rebates and tax credits for high-efficiency equipment and heat pumps change often and differ by state and utility. They are not included here. Ask contractors which incentives apply and confirm on your utility’s and the federal government’s official sites.
If the current system still runs, compare a repair with the Repair vs Replace Calculator.
Common questions
Why doesn’t the estimate change with my home’s size?
Size matters a great deal in practice, but our source does not publish prices by equipment type and home size together. We show the published range and leave sizing to a contractor’s load calculation instead of inventing a size adjustment.
Should I replace the furnace and air conditioner together?
They share a blower and are designed to work as a matched system, so replacing both at once is common when both are old. If one is much newer, replacing only the failed unit can make sense.
How long does HVAC equipment last?
It varies with equipment type, climate, and maintenance. Ask a technician about the condition of your specific system instead of relying on age alone.
Reviewed October 2026. Methodology
