How roof area is worked out
A pitched roof has more surface than the floor area beneath it. The estimator multiplies your footprint by a pitch factor:
Roof area = footprint × √(1 + (rise ÷ 12)²)
A 6/12 roof rises 6 inches for every 12 inches of run, giving a factor of about 1.12. Eaves, overhangs, dormers, and valleys add more, so treat the result as a minimum and let a roofer measure before you order anything. Roofers price in “squares” — one square is 100 square feet.
What the published ranges do and don’t cover
The per-square-foot range for each material comes from a national cost guide and is deliberately wide: it spans product grades, regions, and roof complexity. The “published average” row uses a second source’s average for a 2,000-square-foot roof and tends to sit in the lower half of the range.
Our sources do not publish a separate price for tearing off the old roof or a multiplier for steep pitches, so this estimator does not add either. Ask every roofer whether removal, disposal, and steep-slope labor are included in their number.
What moves the price
- Material — the largest single choice. Metal and slate cost several times more than asphalt but last longer.
- Complexity — valleys, dormers, skylights, and chimneys add flashing work and waste.
- Layers and decking — removing multiple old layers costs more, and damaged decking is found only after tear-off.
- Access and height — steep or multi-story roofs need more safety equipment and time.
If your roof may have years left, compare a repair first with the Roof Repair Cost Estimator and the Repair vs Replace Calculator.
Common questions
How do I find my roof’s pitch?
A roofer can measure it, or you can measure in the attic: hold a level horizontally against a rafter, mark 12 inches along it, and measure straight down to the rafter. That vertical distance in inches is the rise.
Will insurance pay for a new roof?
Homeowners policies generally cover sudden damage from covered events such as wind or hail, not wear from age. Coverage, deductibles, and depreciation rules vary by policy.
Can new shingles go over old ones?
Building codes limit the number of layers, and installing over old shingles hides the condition of the deck. Many roofers and manufacturers recommend a full tear-off.
Reviewed October 2026. Methodology
